NStor Technologies Disk Array Enclosure Uživatelský manuál stáhnout pdf (Strana 74)

Maintenance

Replacing a Fuse

3 Loosen the two thumb screws that secures the card.

4 Insert the new I/O Interface card and tighten the thumb screws. Do not

overtighten the fasteners.

5 Using the packaging materials from the replacement card, repackage the

failed card and return it to nStor Corporation. Refer to the nStor Resource

Guide for information on “Obtaining a Return Material Authorization.”

Replacing a Fuse

CAUTION: Power off the subsystem and disconnect the power cord before

changing the fuse.

1 Locate the fuse holder on the rear panel of the CR8e.

2 Using a small coin, turn the fuse holder counter-clockwise one quarter turn,

releasing the holder from its locked position.

Fuse Assembly

Power Connector Module

250V

Fuse (250V 10A)

Fuse Holder

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 91 92

Žádné komentáře

NStor Technologies Disk Array Enclosure Uživatelský manuál Strana 74